Hi Recently I made two 龍前立dragon maedate.According to the traditional methods of painting. I will pack update steps here,Share the production process.This is my hobby. The following is close to the effect of the completion status display...
Things in the picture are the material will be used , Carved dragon, is to find the semi-finished products.It looked a little stiff. Dragon claws, in advance to find the suitable size beads. Around the nose of the dragon, do the holes for installing moustache. Both must be finished before painting, false docking.
On the left is three kinds of paint, raw lacquer生漆(black),cinnabar朱砂(red),gold base paint金地(adhesion with, presents a deep red). On the right is the sandpaper, big bottle inside is turpentine. Two small bottles are gold and silver powder. Generally, these are the materials to be used.
First of all, is the primer. Black paint uniform repeated three times, Every time can't apply it too thick,If the coating is too thick, paint surface wrinkling. Each time to wait for the last time the dry to begin again. If dry after appearing, uneven surface, then with off excess of sand paper burnish, then repeat primer.
Paint is the best dry environment of 25 degrees Celsius, air humidity of seventy-five percent to ninety-five percent.
Such as primer completely dry, it can be painted gold and silver powder. paint金地(adhesion with, presents a deep red)diluted with turpentine, This step I haven't been able to photograph, because must have a suitable time node, to complete the steps on the gold and silver. The paint金地 uniform and thin coating on the primer, not need to paint to keep out. Waiting for almost half a dry state, start with gold and silver powder on it. Waiting time due to the weather.
After waiting for about two days,You can proceed to the next step, cinnabar朱砂(red). The mouth, tongue, nose, the fire, and the dragon's belly. Painted evenly and thickness as far as possible, as far as possible once in place, not repair, not polished, so as to make the color best.
After drying, can prepare combination. I use glue to 鱼鳔Swim bladder,Take a small piece, then placed them in a bowl, add water covered a night. Waiting for the second day of the adhesive, determine the position of the bonding point now, punch. With white paint draw the eyes of the dragon, and the nails of the dragon.